Choosing the Right Driveway Paving Material

Choosing the suitable material for your driveway is an important decision that influences the durability and look of your home. Various options are available, from inexpensive gravel to expensive paver bricks.

driveway paving

Asphalt is an attractive option for cold climates because it can withstand freeze-and-thaw cycles without damage. It also costs less than concrete and provides many design choices. Contact Driveway Paving Charleston SC for professional help.

Getting your driveway paved can add to the curb appeal of your home, as well as increase its resale value. However, you should weigh up the costs carefully before making a decision. The main areas that drive up the price of a new driveway are excavation, materials and installation. A reputable contractor will have a set fee for each of these and will take into account any special requirements or challenges that may arise during the job. For example, they will need to sterilize the soil before starting work and may need to treat it with a chemical to help ensure that the paving lasts.

Different paving materials have varying costs, so you should compare your options before making a decision. You can choose from asphalt, concrete and gravel. In general, concrete is more expensive than asphalt, but it offers superior durability. It also has a smooth surface that’s easy to drive on and is less susceptible to damage from snow or ice.

In comparison, a gravel driveway is cheaper and easier to maintain than a paved option. However, the weeds can become a nuisance and it requires regular maintenance to prevent it from becoming muddy and slippery. In addition, the sand or gravel can get stuck in the car tires and make it difficult to drive.

You can also opt for a porous asphalt option, which is more eco-friendly than other paving types. This type of pavement allows rainwater to drain through the surface, so it doesn’t build up on the driveway. However, it’s not ideal for freeze-thaw climates because it can crack when ice forms under the surface.

You may also consider tar and chip paving, which is a cost-effective alternative to a concrete or asphalt driveway. This method of paving uses a layer of hot-mix asphalt over a base of crushed stone and gravel. It’s a popular choice for rural areas, where gravel is common. You can also find it in other paved areas around the house, such as paths and patios. It’s a great choice for homeowners who want to maintain their property’s aesthetic.


When it comes to choosing a driveway surface material, durability is an important factor. However, it is also vital to consider other factors that may affect the long-term investment. You should be aware of how each material will withstand harsh weather conditions, traffic rates and other factors. This will help you decide which material is the best choice for your needs.

Asphalt is a popular and durable option for residential driveways. It is relatively inexpensive to install and easy to maintain. It is also more weather-resistant than concrete and can be a good option if you live in an area with frequent snowfalls. Asphalt requires regular sealing to protect against water and sun damage. It is also important to be aware of tree roots that could crack and eat through the pavement.

Concrete is one of the most durable materials for a driveway, but it requires professional installation and can be expensive. It has a lifespan of 30 to 50 years and can stand up to heavy vehicles. However, it is prone to cracking and crumbling under severe usage or bad weather conditions. In addition, it is difficult to repair once damaged.

Paving stones are a versatile option that can be used in many different ways to create a unique look. They come in a wide range of colors, shapes and sizes and can be interlocked to create intricate patterns. They are available in a variety of materials, including clay brick, natural stone and pavers made from concrete. These stones can be laid in a variety of patterns, such as herringbone or running bond, and can be arranged to add visual interest to any design.

Regardless of the material you choose, proper drainage is essential for the longevity of your driveway. Leaving puddles to dry on your driveway can cause it to crack and wear down faster than it should. If you have a drainage system installed on your property, it will prevent moisture from seeping under the pavement and causing damage that is expensive to repair. In addition, proper drainage will prevent flooding and erosion.


When your driveway is laid, you will want it to look as good for as long as possible. While the longevity of any paving material is dependent on the climate and usage, all driveways can eventually show signs of deterioration. However, this can be slowed down significantly by taking a few key steps.

It is vital that the paving contractor installs adequate drainage. This will ensure that standing water does not compromise the materials, causing cracks and other types of damage over time. The drainage system can be augmented with gravel or pipe cross drains to further reduce the risk of damage and increase the lifespan of your asphalt driveway.

Paving contractors can also offer a variety of other services to help maintain your driveway, such as sealcoating and crack repair. It is important to find a contractor with experience in these services, and one who is licensed and insured. In addition, you should carefully read the contract before hiring a company. Ideally, the contractor should have references and testimonials from previous clients.

If you decide on concrete block paving for your driveway, the choice of colors, shapes and patterns is virtually limitless. There are natural tones as well as bright and bold options. The shapes range from classic brick to more avant-garde designs. The pattern possibilities are also diverse; from simple running bond, herringbone to a more complex interlocking scene. You can also choose from a wide selection of finishes, ranging from smooth to tumbled.

When your paved driveway is new, it is important to give it adequate time to set before subjecting it to heavy traffic and loads. This is because it takes time for the asphalt to fully bind and cure. You should avoid parking on it until after the curing period is over, unless otherwise specified by your contractor.

A standard level of maintenance will keep your paved driveway looking good for years to come. The paving can be cleaned with hot soapy water and a stiff-bristled brush. The joints can be filled with jointing sand and the surface regularly swept to remove any loose debris. It is important not to use a power washer though, as this can dislodge and damage the blocks. Regular application of weed control products will help to prevent the emergence of weeds and moss, which can quickly detract from the appearance of your driveway.


A driveway paved with pavers provides the opportunity to be more creative than a traditional asphalt driveway. You can choose from a variety of patterns and colors that are sure to add visual interest to your home’s exterior design. Some popular paver options include herringbone, basketweave, and running bond. You can also use hexagonal or octagonal pavers to create a unique and eye-catching pattern. If you want to get really creative, try combining patterns on different sections of your driveway. For example, a herringbone pattern in the center with a basketweave or running bond border can provide both strength and aesthetics.

Concrete block paving has enjoyed long-term popularity and offers the advantage of being easily adapted to almost any design style. It’s also relatively inexpensive compared to other paving materials and can be tinted to resemble other types of materials such as brick or natural stone.

If you’re looking for a classic and elegant look, consider using clay bricks to pave your driveway. Red bricks, for instance, provide a warm welcome to your home and work well with contemporary or transitional architectural styles. They can withstand heavy traffic and can be sealed to protect them from the elements.

Another option is to use permeable pavers for a greener, more environmentally friendly alternative. These driveway paving stones feature wider gaps that allow rainwater to filter down through the surface and prevent surface flooding. Unilock is one of the leading manufacturers of these eco-friendly products and offers a wide range of color options to match your home’s aesthetic.

A paved driveway can enhance your home’s curb appeal and increase its value if you ever decide to sell it. It can also help to improve your comfort while driving and reduce the risk of skidding, especially in icy conditions. However, it’s important to find a contractor who is experienced in installing pavement and can perform all the necessary preparation work, including treating, sterilizing, grading, and compacting the soil. This will ensure that your new driveway will be durable and stable for years to come.